Stone Retaining Walls and Steps to Build Them

Stone Retaining Walls are used to make the transition of the ground with a usable barrier. The creation of it is very easy as one can make it by the slop cut in levels which can be located beside the wall. Retainers increase the amount of usable land with geometric design. The amount of flatness can be increased with the maximum height which can be 3 feet tall. If your DIY project retainer’s height is 3 feet, you can build yourself otherwise one must take the help of the professionals.

One of the easiest ways to build the stone retainer is to utilize the special method named dry-stack that does not require any concrete footing or mortar for being steady. Dry-stack walls are drained very nicely which can allow us to pass the water through itself properly. The hydrostatic pressure can be reduced by it greatly which would cause by the wet soil behind the wall.

The most common cause of the failure of the retainer to hold is not to have any plan for the backfilling. The wall that made the rock can promote drainage system with the utilization of the backfilling.

Regulations and codes for Stone Retaining Walls

One must check the codes and regulations of the locality to build a retaining wall in the area. The government may have included different types of laws and regulation regarding the digging activities of the soil. It is a better choice to work with the local digging companies as they may provide important permissions from the respected authorities. Sometimes underground pipes may go through your homestead, and if you do not know the actual placement of them, you may face problems later. You may call 811, before starting the digging process as it may help you for the advancement of your project.

List of Equipment

  • Hammer
  • Maul
  • Shovel
  • Rake
  • Wheelbarrow
  • Wood stakes
  • Mason’s line

Materials to be used

  • Coarse sand
  • Cut stone
  • Landscape fabric
  • Gravel
  • Masonry adhesive

Instructions to build the stone retaining walls

Organization of the stones is mainly dependent on the shapes and sizes. The builder needs piles of stones with different sizes. Flattest and largest stones may work as the best solution for the base of the retainer. One the other hand, the smoothest and widest stones may be utilized as the capstones for the top of the wall. One should be conscious of the odd sizes of stones and the uses of it as these are mixed with the regular stones.

For the maintenance of the overall consistency, the landscaper may knock the peaks which are in off sizes with the maul and chisel. Best formations are very needed to make the best fit of them during the construction. The builder must feel up the spaces between the slope and the wall with the gravel which is used for the drainage purpose.

To conclude, it can be said that building a natural stone retaining wall is not that much tougher as it may seem. The investors must make the proper utilization of the tools and material to make the wall sustainable.

Leave a Reply

Your email address will not be published. Required fields are marked *